Your Search for "hearts" results:
Queen of Hearts Wreath
In a well-ventilated, newspaper-covered area (inside box), spray all sides of the foam ring with two coats of Carnation Red and let dry. To cover the foam ring, glue one end of the ribbon to the back of the ring and wrap the ribbon around it. Keep wraps snug, with each wrap just touching the […]
Don Zwiefka Named FloraCraft 2023 Wall of Fame Honoree
FloraCraft® is pleased to announce the late Don Zwiefka as the 2023 FloraCraft Wall of Fame Honoree. The FloraCraft Wall of Fame is dedicated to recognizing and honoring individuals who have contributed to the organization’s success and have played an essential role in its mission. Zwiefka is being recognized for his contribution posthumously as he […]
Wire Wreath with Succulents
Use the paddle wire to secure the 10” wire wreath into the center of the 14”. Cut the stem from the succulent and glue it to the center of the rings where the two rings are wired together. Cut the leaves to separate them and glue them behind the wire wreath but facing forward so […]
Dried Floral Arrangement
Wrap painters tape around the base of the pot. Paint the top portion of the pot off-white and let dry. Cut the dry foam brick to fit inside the container. Allow the foam to be about 2” taller than the top of the pot. Determine the height of the arrangement and insert your tallest grass […]
Who-o Loves You?
Use a pencil to trace Foam Heart onto the wrong side of each sheet of chevron paper. (Note: Plan how to position hearts so that chevron print will run horizontally across hearts.) Use Floral Shears to cut them out. Set aside. In a well-ventilated, newspaper-covered area (inside box), lightly spray ends of Foam Heart with […]
Trick or Treat Wall Art
Using the foam cutter or serrated knife, cut 12” off the end of one 36” sheet to create a 12”x24” canvas for your sign. Spray paint this piece black. Be sure to hold the can at least 12” away from the foam applying light coats and let one coat dry before applying the next to […]
Heart Trio
Using a rotary cutter and acrylic ruler on the cutting mat, cut two 1″ x 72″ and two 1″ x 16″ strips from light pink, and four 1″ x 72″ and one 1″ x 20″ strip of dark pink felt. Set aside short strips for flowers. (Note: It takes approx. 1 1/2 strips to wrap […]
Valentine Box
Refer to package instructions to assemble Diorama using tacky glue and toothpicks. (Note: Diorama will be turned with an opening at the top to use as a box.) Using tape as it comes off the roll, attach designer masking tape to vertical corners of Diorama and evenly trimming ends. Similarly, apply tape around the top […]
Valentine Centerpiece
For a mailbox, use a foam cutter to cut 4″ x 8″ Base. For two ends, trace the pattern onto the foam block and cut it out. On both short edges of Base, insert round toothpicks approximately 1″ into foam, spacing toothpicks 1″ apart from each other. Run the glue stick along the bottom edge […]
Subscribe
