Your Search for "" results:

Smooth Decorative Spheres

Completely coat the ball with Smooth Finish™.  Smooth Finish™ can be applied to foam a couple of different ways; with a spatula or with a flat paint brush.  Be sure to mix the material before using.  When using a spatula, apply a small amount of the Smooth Finish™ to the foam and spread it out […]

Smooth Ornament with Glitter and Ribbon

Completely coat the ball with Smooth Finish™.  Smooth Finish™ can be applied to foam a couple of different ways; with a spatula or with a flat paint brush.  Be sure to mix the material before using.  When using a spatula, apply a small amount of the Smooth Finish™ to the foam and spread it out […]

Smooth Ornament with Beaded Embellishments

Completely coat the ball with Smooth Finish™.  Smooth Finish™ can be applied to foam a couple of different ways; with a spatula or with a flat paint brush.  Be sure to mix the material before using.  When using a spatula, apply a small amount of the Smooth Finish™ to the foam and spread it out […]

Smooth Half-Ball Trees

For the tallest tree; cut a 4”, 3”, 2.5”, 2”, and a 1.5” ball in half.  Glue the half balls together stacked one on top of the other, from the largest to the smallest with ½ toothpicks inserted in between each layer.  Glue two 1” balls on top of the tree.  Stack the balls straight […]

Wood Grain Kitchen Sign

1. On cutting mat, horizontally place foam block. Measure and mark every 2 1/2″ for a total of seven strips (11 15/16″ long). Use a serrated knife to cut along pencil lines, scoring lightly first and then pressing deeper with each knife’s pass. 2. Use a table knife to apply Smooth Finish to one strip, […]

Chalkboard Eggs

Set a piece of plastic wrap on the table. Use Foam Tools, Knife (smooth side) to apply Smooth Finish™ onto each egg, as smoothly as possible. Set eggs on plastic wrap to dry. When totally dry, use sandpaper to sand eggs to smooth as needed. (Note: If any areas are thin or need a new […]

Christmas Countdown

Use the foam cutter to cut the foam sheet in half.  You should have two 12×18” pieces.  Set one piece aside.  Cut 3” off the 18” side the second piece.  You should have a 3”x18” piece and a 9”x18” piece. Use the spatula to apply the Smooth Finish® to the top and edges of the […]

Merry Christmas Faux Pallet Art

Lay the ruler across the 12″ end of the foam sheet. Make a mark every 4″ with the black marker to create the boards. Do this at both ends of both foam sheets. Lay the ruler even with the marks at the top and bottom of the foam sheet. Hold the ruler tightly to the […]

Crafty Candy Corns

Smooth Candy Corns Cut the front and back of each of the cones flat with the Foam Cutter.  The cones should measure about 1 ¾” thick at the bottom.  Use the scrap pieces of foam as sanding blocks to even the edges and give the candy corn a rounded shape. Apply an even coat of […]

Nautical Faux Pallet Art

1. Lay the ruler across the 12″ end of the foam sheet.  Make a mark every 4″ with the black marker to create the boards.  Do this at both ends of all three foam sheets.  Lay the ruler even with the marks at the top and bottom of the foam sheet.  Hold the ruler tightly […]

Faux Pallet Art

Measure and mark with pencil, four 3”x18” pieces from the foam sheet.  Use the foam cutter to cut the pieces apart. Use the foam cutter to cut about 1” to 1.5” off the end of two of the pieces.  Use the foam cutter to slightly round the corners of the pieces.  This will give the […]

Metallic Mushrooms

Cut the 4” and 5” balls in half.  Use the metal spoon to scoop out each half ball to create four hollow half balls.  Scoop the ball out evenly so that you have about a 3/8” thick shell. Completely coat the half balls with Smooth Finish™.  Smooth Finish™ can be applied to foam a couple […]