Your Search for "cones" results:
Donut Hole Cone Party Tower
1. Wrap each of the cones with parchment paper to completely cover. Secure the parchment paper in place with glue. 2. Starting at the bottom of the cone, push a toothpick into the cone partway. Secure a doughnut hole onto the toothpick. Repeat to cover both cones with doughnuts side by side. Alternate the types […]
Mini Snow Cone Garland
1. Lay the desired number of balls spaced apart how they will be hung on the garland. Decide which color the balls will be painted. Decide how many of each color will be needed. 2. Push a toothpick into each ball. Use the toothpick as a handle while you paint. Paint the balls in the […]
FloraCraft® Develops First Craft, Floral Foam Made from Recycled Plastic
In a market segment not known for innovation, category leader FloraCraft® has announced a breakthrough new product that saves hard-to-recycle plastics from the landfill, enabling it to offer a “greener” product to crafters and florists. The Northern Michigan manufacturer recently debuted FōM® with PolyRenew®, a craft and floral foam line made with post-consumer recycled plastic. […]
FloraCraft® Brings Production of Foam Products In-House
Move To Vertical Integration Also Reduces Company’s Carbon Footprint FloraCraft® announced today that it will produce its floral and craft foams in-house, ultimately protecting Michigan manufacturing jobs while reducing its carbon footprint. After more than four decades of utilizing an outside supplier, the Ludington-based manufacturer has made a significant capital investment that will allow its […]
Mosaic Toadstools
For the two smaller toadstool bases, use a serrated knife to cut points off two cones, 3″ and 3 1/2″ down from the top. (Tip: To make the cut straight, mark the distance with a pencil, wrap a rubber band around the cone and adjust until straight. Then cut right alongside the rubber band.) For […]
Noel Gnomes
Firmly roll the bottom edge of the cones on the table to taper them at the bottom. Cut a 14”x 6.5” piece of charcoal felt. Wrap and stretch the felt around the bottom section of the 15” cone. Trim the felt along the seam at the back and glue neatly in place. Trim the felt […]
Snow Cone Fun
Insert a craft stick into the bottom of one foam ball. Squeeze pink paint onto a paper plate and paint. Insert the other end of the craft stick into a scrap foam to let the foam ball dry. Repeat with orange and yellow color on other foam balls and let dry. (Leave craft sticks in […]
Candy Creature Topiaries
Wrap all foam parts with tissue paper colors of your choice and glue them to secure them. Cut the 4” balls to fit inside the three pots. Wrap the three balls with black tissue paper and glue them into the pots. Use straight pins to secure black licorice to the 6” and 9” cones and […]
Tin and Tack Holiday Decor
Cut pieces of foil to fit around the cones, one 4” ball, and the 3” ball. Wrap foam shapes and glue edges of foil to secure in place. Embellish the foil cones and balls with metallic ribbons, silver studs, and thumbtacks. Paint the remaining 4” ball silver and let dry. Insert a toothpick into the […]
Decorative Fringe Trees
To create the tallest gold tree, cut 3” off the top of a 9” cone using the serrated knife. Cut 3” off the bottom of a second 9” cone. Glue the 6” bottom section of one cone onto the top of the 3” bottom section of the other cone. Glue the 6” top section onto […]
Noel Wall Art
Cut the 36” sheet into three 12” squares. Print letter and bird templates onto cardstock and cut out. Pin the templates to the 12” squares. Following the package instructions, carefully cut out the letters from the foam squares using the StyroCutter® Plus. Do not force the blade through the foam, and be sure to keep […]
Cone Christmas Characters
Paint two small twigs white for the snowman’s arms and set aside to dry. Cut pieces of green, red and white felt to cover the three cones. Cut a 3” circle from the white, pink and tan felt to cover the heads. Cut two 2”x 3” pieces from the green and two 3” x 3” […]
Subscribe
