Your Search for "wire cutter" results:
Skelly Skeleton
Before working with the child Open the packages of foam and remove: One large egg, two small eggs, and ten foam balls. For the fingers and toes (phalanges) use a wire cutter to cut off and save the two cotton ends (plus 3/8” of the stick for insertion into foam) from each of ten cotton […]
Snow Cone Fun
Insert a craft stick into the bottom of one foam ball. Squeeze pink paint onto a paper plate and paint. Insert the other end of the craft stick into a scrap foam to let the foam ball dry. Repeat with orange and yellow color on other foam balls and let dry. (Leave craft sticks in […]
Glitter ‘n Lights
To paint pears, place them in a well-ventilated, newspaper-covered area (inside box). Spray each pear with spray texture. Let dry completely. Next, spray one pear white, quickly remove from paint area, and while still damp, sprinkle with Diamond Dust™. (Sprinkle over clean paper so that you can pour excess Diamond Dust™ back into the container.) […]
Floral Pumpkins
Cut a small flat spot off the bottom of the 4” and 2.5” balls. Pull the orange mum blossoms off from the stems. Glue the flowers to the 4” and (1) 2.5” balls to cover. The bottom of the balls can be left bare and leave a small spot at the top to insert the […]
Twine Wrapped Vase
Twine wrap carpet tape all around bottom of glass vase, but do not remove release paper. Similarly, add a middle row and top row of tape, making sure that the entire outside of the vase is covered with tape, leaving release paper in place. (Note: Use scissors to trim as needed so that tape doesn’t […]
Layered Succulents
Remove bowls from metal server and set server aside for now. Wash bowls and thoroughly dry. In a well-ventilated, newspaper-covered area, (inside cardboard box) spray all three bowls with primer. Let dry. Then, spray bowls: Large – Larkspur Blue; medium – Ice Blue; and small – Blue Sky. Let them dry. To provide an additional […]
Colors of Fall Arrangement
Hot glue foam half ball into bottom of pot, flat side down. Use wire cutter to trim Tiger Lily stems to 18″ and insert into center of foam with one facing the front and one the back. Cut apart Gerber Daisy bush into individual flowers and randomly insert all around Tiger Lily stems. (Note: For […]
Shanty Chic Arrangement
Use foam cutter to trim foam block to fit into coffee can as needed. Hot glue foam into bottom of can. Use wire cutter to trim both knife blade sprays to 25″ tall. Insert both into center of foam. Trim three Daisy bushes to 19″ tall. Insert into foam, evenly spaced, all around knife blade […]
Spring Succulents
Hot glue foam half ball into bottom of pot. Use wire cutter to trim Delphinium stems to three lengths: 20″, 18″ and 16″ long. Insert each one separately into the foam left of center. (See photo.) Cut apart stems from Pepper Berry foliage and insert behind and to the right side of Delphinium stems. Allow […]
Hanging Flower Cans
Thoroughly clean soup cans of all labels and glue – wash with soapy water and dry. In well-ventilated, newspaper-covered area (inside box) spray each can with two coats of each in the following order, drying in between: primer, white, and either yellow or fuchsia. Let dry. Measure and mark bottom center (outside) of one can. […]
Winter Wedding Table Arrangement
Use foam cutter to trim dry foam sheet to fit inside tray. Use glue gun to attach to bottom. Press in place until firmly set. Depending on weight of floral wire, use Floral Shears or Wire Cutter to trim floral stems to approximately 1-1/ 2″ lengths, as you go along. Start with one large Daisy […]
Jute-Wrapped Cone Sconce
The Foam Cone should be painted so that any spaces between Jute Twine wraps don’t show through as white. Also, the wide end will be left uncovered so that florals can be inserted and that would look better not being white. So, in a well-ventilated, newspaper-covered area (inside box) spray Foam Cone Antique Gold. While […]
Subscribe
